Showing posts with label Chaos. Show all posts
Showing posts with label Chaos. Show all posts

Monday, December 07, 2015

Lord Gaudinzor, the hunter paret 3

So we have the running body from the Dark Vengance aspiring champion, with the faceless head made by shaving down a Tau helmet, that is connected via a half dozen cables to a lascannon backpack.

Well, that leaves the arms, and by extension the weapons. I've decided to give him a pair of extending swords mainly for the modeling potential and the dynamism. Having two whip like weapons requires the entire body to be in motion in order for them to be of use, other wise the on-attack weapon is held back by the counter force of the off-attack weapon.

The swords are still going to be segmented with the coil whip sections between the bladed sections. Previously I had done this by cutting the Raptor power sword into sections, drill a hole in each section, and then passing a length of pewter power cable through the segments. This works... visually... but not for gaming purposes.
The problem with this for a gaming piece is the general abuse a gaming piece will be exposed to. The stresses of being picked up and placed on the table. Being stuck into and removed from foam. Being pressed against other models, the list goes on. The pewter cables look very good, but they are not terribly strong and over time, the stresses placed on it will cause it to break. If used in a way where the cable is placed against something, like the hull of vehicle or the hips of a space marine, the stresses are greatly reduced as the majority of the stress is taken by the model. In this situation the pewter cable is free standing, or rather free flowing, and is out in the open exposing it to the full stresses with out anything to brace the cable.

So I needed to figure out a way to address this problem, while still keeping the visual appearance of the segmented sword with the whip coils. I hit on the idea of making several sections of power cables, using the Green Stuff Industries Tentacle Maker, and then drilling out a section through each segment so I could pass a thicker gauge wire through the power cable. Beyond this is was just a matter of sliding on each segment of sword blade and gluing the parts into place. Once all the segments were in place, I just had to bend the finished weapon into form.
Of course I still had to make the second weapon:



Friday, December 04, 2015

Lord Gaundinzor, the hunter part 2


So last time I talked about the prototype version of Lord Gaundinzor. With the prototype I used the normal Chaos Marine legs and a Raptor Torso for the body. While this provides a solid base for the model it doesn't provide the dynamic range of motion I really want the character to convey. So I went back to the drawing board and worked to plan out the model some more. I knew I wanted to have the model showing a fair amount of motion. I also wasn't thrilled with using the multi-melta back pack. It looks less like it houses a cogitator array and more like it;s carrying a supply of promethium. So I wanted to change that as well.

The backpack actually turned out to be simpler to deal with then I first though. Just a power plant back pack from a lascannon devastator marine. I had to cut off the power feed that would normally go to the lascannon, but even this actually helps with the character of the model. The entire thing about Gaundinzor is his 'inhumanity' and 'unreal' visuals. He's a space marine so he's around the 8 feet tall mark. He's faceless, yet he can see. In fact he can see better then someone with eyes. He wear this heavy armor, yet he's a master swords man as if the armor isn't a problem at all. He's got this massive backpack, yet he doesn't fall over and pulls off moves a circus acrobat. Everything about him physically is challenged by his actions, and now he's hunting you. He is supposed to be terrifying. So I wanted to make him terrifying.

The first thing was the head. With humanoid characters the head, and more specifically the face, is a focal point for the model. It's really a human instinct, we look to the face for expressions of emotion and intent. How do you tell if someone is being hostile? Or if they're being serious? Or really any other range of human emotions for that matter? You look at the face. The face is the 'human' aspect of a model. It conveys emotion, or conveys the lack of it in the case of helmets. So there are the two options right? a face or a helmet? Well, sort of. There is one other option though in reality it's the absence of other options. This what I wanted to go with for Gaundinzor, the absence of a face. See, we're conditioned to see 'human' in even abstract objects. Don't believe me? Look at this:

It's an electrical outlet. But can't you see a face too?  The ground port is the mouth and the positive and negative ports are the eyes. Now look at the shapes of each part. The negative slot is larger then the positive while the ground port is shaped like a tunnel opening. Looking at all three elements combined produce a visual suggestion of a face making the 0.o look. This is why the helmets on space marines draw so much attention from painters. Ever tried to paint the lenses on a space marine helmet red and accidentally over paint winding up with what looks like the space marine is bleeding out of his eye sockets? Suddenly your trans-human super-solder in futuristic power armor looks like they're trying to perform a bad kabuki theater production.

But like I said, I've elected to go with a 'faceless' design with Gaundizor. That is I want to completely remove any semblance of a humanity from the face... well head. Why? Because it looks freaking creepy! What? Don't believe me? Ever see Pirates of Caribbean: Dead Man's Chest? Remember when Will Smith turned the sailor over who had his face sucked off by the Kraken? Admit it, you were shocked too. Why? Because it's so far removed from 'human' we have no basis of comparison to it. No eyes, no mouth, no eye brows, eye sockets, nose, cheek bones, nothing. There is just no face what so ever for us to relate to. This is why that kind of thing is so freaking creepy. Now take that image and combine it with someone who stands 8 feet tall, has armor comparable to a small tank, moves faster then any human let alone one that is 8 feet tall should be able to move, and is hunting you. You have no means to see if any thing is effecting him. Did that shot to the chest even hurt him? Will that door even remotely slow him down? Think about it this way. Imagine you are playing a video game, and you come to a big boss fight. And the boss has no health bar and makes no reaction to your attacks. You land hundreds of hits with every gun in your arsenal only for the boss to continue attacking until finally you're dead. How close to beating him were you? Were your attacks even having an effect at all? Is there another trick to beating him? You can't tell. You may have been completely wasting your ammo firing at him or you may have been exactly 1 hit point away from beating him. That's the sort of inhuman terror I want to have this model make. So what did I do to get this?

Chaos space marine Lord Gaundinzor's head, made by shaving down the front of a Tau helmet and attaching cables to the sides.
I took a Tau helmet and removed all the detail from it leaving it smooth. There are no optical components on it. No camera, no lenses, no scanners nothing to indicate where he could actually be looking. To help carry the idea that Gaundinzor doesn't actually use eyes, but rather is fed a digital manifestation of the environment, I drilled out a series of holes along the edge of the helmet mounting and inserted a series of small cables, again from  Dragon Forge. These cables will be attached to the back pack.

So next thing, showing more motion. How can I do that? Well change the model position. What space marine models typically show the most motion? Models with running legs. So assault marines and Raptor legs were what I looked at first. But the assault Marines and Raptor models didn't have the... what's the word.... the right detail level for what I wanted. So I did some more looking and finally settled on the body from the Dark Vengeance aspiring Champion.

Here's a shot of the version 2.0 along side the original prototype. Please excuse the 'cyber whiskers'. The head is attached to the back pack and effectively free-floating at the neck. I have some green stuff in there and until that dries I don't want to try and move the other cables to attach them to the backpack. So that's going to wrap things up for today.

Wednesday, December 02, 2015

Lord Gaudinzor, the hunter

So, it's that time of the year once again. You know, that one that starts with Thanksgiving and culminates with January 12th. Yes, I am referring to the holiday season for retail. We've already had Black-thanksgiving, Black Friday, Black-saturday, Pre-cyber Monday (Sunday), Cyber-monday, and Cyber-monday Follow-up (Teusday). I truly hate this time of year. 50% of the sales are crap sales that were better two weeks prior, while half of the products being put on 'sale' are crap made specifically for this period to be cheap so stores can sell them for $40 and people will think their getting a $150 item. Anyway, I still work in retail so I have to deal with it all. Friendly suggestion, don't go shopping on Black-friday and please don't buy stuff on Thanksgiving. The more money companies don't make by being open on Thanksgiving and not selling stuff, the more likely it is that retail workers will be able to get Thanksgiving back as a holiday.

Anyway all of that out of the way, today I am returning to Warhammer 40,000 with a new Chaos Lord for my Chaos Space Marine army. My view of a Chaos Space Marine is one of varied and loose alliances. A Chaos army isn't an 'army' the way an Imperial Guard or Space Marine army is. It will be a force made up of multiple groups that has been talked into working with the other groups through one means or another. Typically the focal point will be the Chaos Lord himself. He or She will be the one that is able to offer something of interest or value to the other groups to get them to cooperate. Perhaps the Lord can offer lost relics from an ancient world to get a Thousand Sons War Coven's cooperation, or maybe He will swear his warbands services to helping a Crimson Slaughters lord's efforts to hunt down an offending daemon lord. The possibilities of payment are long and varied.

What am I going on about? Well the justification for building my Chaos Space Marine collection the way I have been. I have an Iron Warrior Squad, a Night Lords Squad, Dark Mechanicus war constructs and I have plans for other groups I'm intending to add to my army. Each of these can become the core of an army onto itself. Or I can mix various units to form a unit, justifying it fluff wise by way of the loose alliance I just explained. This project is a perfect object example of this approach. I crafted the character before I worked to craft the model.

Functioning as Lord Roth'Gar's Lieutenant and direct liaison to Dark Magos Bargose, Gaudinzor has subjected himself to numerous experiments by Bargose that have resulted in enhanced combat abilities, deadlier weapons and an increase in his own sadistic tendencies.

Gaudinzor is a sadistic individual ever seeking to prove his superiority but he takes it further then most. For him, it's not enough to simply best them in a fight, or kill them in a duel. He wants to utterly destroy them, in every way it possible. He will purposely draw out a fight for the purpose of psychologically breaking his opponent before killing them. Rather then a swift strike to decapitate, or a thousand minor strikes to inflict pain, or even a targeted strike to incapacitate, Gaudinzor will serve feints within feints, toying with his opponents, drawing the battle out for hours even days only landing telling blows as examples of how futile his opponents attacks and defenses truly are. Stroke by stroke, Gaudinzor will tear down his opponents until there is nothing left and they beg him for death. And then, only when there is nothing of the proud warrior left, will he kill them.
Honestly the genesis of this character was a random image I ran across:
Thanks to the internet I learned the image is a rendition of the character Ivy from the Soul Calibur series. After some reading I learned that her sword was effectively 'alive' and reacted to her commands. That was really the first thought that gave rise to this lord: A Space Marine with a living sword that extends to become a bladed whip.

As I thought about it more I developed more details. A featureless visage. A large back pack to house a cogitator array. he doesn't use his eyes, rather he is fed tactical data from the cogitator array. He would be viscous and cruel killer. Ultimately more thinking lead me to the fluff passage I post earlier.

So with at least a rough idea in mind, I worked on a first effort for the model. I knew going into this, that I was likely not going to finish this particular model as it was intended more as a development of concept project then a final project. Still, have to start somewhere.

Lord Gaudinzor, a Chaos Space Marine

For this prototype effort I used normal Chaos Marine legs with a Raptors torso and a multi-melta backpack. For the sword I used a Raptor power sword cut into 2mm long segments with a hole drilled through the center of each segment. I then used a length of small diameter cable from Dragon Forge and passed that up through the sword segments. This gave me a semi-flexible body to work and tweak. It works but has problems. First off the pewter cable is fairly weak and with time it will break off from being flexed by being put into foam and taken out. Also the entire model looks very 'static'. He's not this viscous killer using super swords, he's a guy with ADD waving his cool sword about. So the model itself doesn't work visually for what I'm trying to produce. As a protoype effort it works, but I know I can do better. So that is what I will talk about next time. Version 2.0 of Gaudinzor, the Hunter.

Thursday, February 26, 2015

Chaos forces - Dark Adeptus Combat Constructs

I've been shifting some focuses in the past couple months, in terms of 40k projects and have been working on my Chaos Space Marine forces recently. One of the central concepts in my view for my Chaos Forces is that it's not a single unified army that answers to a single leader. Rather it's a loose conglomeration of different groups that for today, have agreed to work with one another for whatever reason. This gives me lots of conversion possibilities and separate modeling options by having different squad from different legions and war bands. I can have a squad of Night Lords along side a unit of World Eater Berzerkers advancing under fire support of Dark Mechanicus Servitor Slaves under the command of a Renegade Nova Marine turns Chaos Lord.

So, this particular entry is a Count-as Obliterators unit. The idea is that they are Combat Constructs, heavy combat machines akin to baby dreadnoughts. The Dark Mechanicus are given prisoners, which it then cuts their brains apart, wire them into a Servo-matrix that consults the brain for creativity and then applies what the program decides is good to the battle field. This gives the constructs greater adaptability in the field then a pure machine spirit controlled unit. The end result are large, heavily armored constructs plodding across the battle field bringing an assortment of heavy cannons and dark energy weapons to bear against their designated targets.

Count As Chaos Obliterators converted from Space Marine Centurions.
The models are based on Centurion models with a few minor modifications. I got the core idea from a conversion done by Dave Taylor as an addition to his Adeptus Mechanicus forces. I could have sworn he was also where I got the idea the idea for the domed heads but after breezing back through his blog I couldn't find it. Anyway, I had the idea to instead of using heads to put domed helmets on them to help carry the idea of face machines. I accomplished this by taking space marine shoulder pads, cutting off the bottom rim and then shaving down the sides just a bit to allow it to fit in the space on top of the Centurion bodies.

In order to remove the more Imperial looking designation from the shoulder pads I had to use a combination of an exacto blade and sanding sticks. I used my exacto blade to cut a hard line along the edge of the rimming on the shoulder pad. I then came in and very carefully carved away the imperial insignia and details from the shoulders using the cut line as a sort of break point so I would be less likely to accidentally cut through the rim edging. Once I had the majority of the insignia cut off I cam back with sanding sticks and smoothed out the remains. I did a similar removal of the insignias on the chest plates as well.

The rest of the conversions were largely on an individual model basis and largely based around mounting different weapons on the arms.

Count As Chaos Obliterators converted from Space Marine Centurions.

To carry the "old style tech" sort of look I raided my supply for Pre-heresy Forge world heavy weapons. Here I had to cut off the back shoulder padding and brace and then mounted the Multi-melta to the under side of the right arm. I was able to flex the cables from the Centurion kit enough to meet up with the side pressure chambers of the Multimelta. I still need to come back and use a little green stuff to join up the connection itself.

Count As Chaos Obliterators converted from Space Marine Centurions.
For the second Obliterator I used the plasma cannon and again had to cut off the back of he shoulder mount. I used the tentacle maker from Green Stuff Industries to make a pair of cables. I cut small segments of styrnene tubing and affixed the green stuff cables to those slices and then glued the slices to the back of the Centurion body and the Plasma cannon body respectively.

Saturday, August 02, 2014

the March of Chaos...

So I'm a masochist. I enjoy torturing myself. I have to be. There's no other answer for why I keep coming up with more projects to under take and keep throwing myself into them to the depth that I do! In the last 7 months I've under taken the following projects:
And those are just the projects that I can actually be bothered to list off the top of my head with out really searching. There's a bunch of other models sitting on my project shelf that isn't included in that list. So what am I getting ready to say? Yup, I'm working on something else. Actually I've been working on it for several months now. With the revamp of the blog it seemed like a good time to talk about it. So what else am I working on? Well remember a couple months back I took that info on Atomic Warlords and remade the Chaos Space Marine army list? Weeeeeell I'm taking it further and rebuilding Codex: Chaos Space Marines, actually rebuilding is the wrong word. Replacing is more accurate. See I'm not actually rebuilding the Chaos Space Marine codex, I'm replacing it with a series of three codecies; Codex: Chaos Renegades, Codex: Chaos Legions and Codex: Books of Chaos.

Why am I making three books to replace the single book? Well because from my view of Chaos you have several distinct major factions of power and influence that can potentially feed into any given army that is assembled under the 'Chaos' banner. These forces include the following:

Traitor Legions: These are the 9 traitor Legions that turned traitor during the Heresy.
Renegades: This is the mix of Astra Militarum and Adeptus Astartes units that have turned traitor following the heresy. The occasional squad of Marines that want something more, the disgruntled Militarium units, the detachments of marines that have been lost in the warp for 5,000 years.
The Dark Mechanicus/Chaos Titans: Yeah, there's the Dark mechanicus. What more is there to say? These are the dudes who create and maintain the Forge fiends, Mauler Fiends, Defilers, HelDrakes, Chaos Knight Titans, Lord of Skulls, and all those fun little toys.
Chaos Daemons: ...um the Chaos Daemons.Yeah, it's the Daemons.

Largely any mixture of these four powers can be used to create an army under the banner of "Chaos" and each have their own strengths and weaknesses, too many for any one book to be able to properly facilitate into an army. Thus why I feel the need to create a series of three books.

Chaos Renegades: This is the book most closely based on the current Codex: Chaos Space Marines. This book will focus on the more combined war-bands as an army aspect of Chaos. See, this is NOT Space Marines with spikes. This is Warlord who has cobbled together an army out of various groups. Each group has been paid/coerced/threatened/blackmailed/ or in other form asked to perform some duty with in the army. Once again, this is NOT a space marine army with spikes. Some of the units may have come from Space Marine chapters, but they are no longer Space Marines. They are augmented, genetically enhanced, post-human warriors. They are in this for their own gain. Bonds of loyalty are rare finds outside of the smaller war band/squad. Armies built from this book will be extremly diverse and may even appear to be patch work armies where mobs of Traitor Astra Militarum solders fight along side Dark Mechanicus daemon engines while a unit of Marine Bikers zooms up the field.

Chaos Legions: While the legions as they existed during the Heresy are gone, there are still groups that emulate their operations and organizational structures.So while technically speaking these armies are not THE Legions, in-game there is no appreciable difference. Yes, all of the original World Eaters got the Butchers nails stuck in their skulls and thus became Berzerkers. Yes all of the original Thousand Sons became Rubrica. Yes all of the original Death Guard became Plague Marines. But there are other groups that emulate them and in so doing have formed a sort of second generation of the original Legions. The Sons of Horus reformed when Abaddon forged the Black Legion, while aspiring butchers emulate the World Eaters. Here is where you will find the resources to field these second generation Legion armies. The Traitor Legions are still extremely powerful armies with many of the strengths of the original Space Marines Legions including technology that has been otherwise lost to the throes of time AND formations and operational standards that were handed to other groups following the formalization of the Codex Astartes.

Books of Chaos: Initiative 5 Terminators with Sonic weapons. Plague ridden dreadnoughts dedicated to Nurgle, exuding clouds of flies and noxious as it stomps forward. Daemon infused war engines utterly removed from what the Dark Mechanicus can build. During the 3rd-4th edition era, there was a series of Sub-lists in the Chaos Space Marine Codex called "Books of Chaos" and the idea behind them was that it would allow players to craft and field armies that were dedicated to a given god of Chaos. These sub-lists gave us a lot of extra options that have since been removed. Some of these options include God-speccific upgrades available to the likes of terminators which is the basis of the often lamented "Cult Terminators". Books of Chaos will be the renewal of this concept and will be expanded so that it will be a viable army on its own right.

So whats my point to all of this? Well I've set up a second website to serve as a central point for all of my efforts in re-craft the Chaos Space Marine codex into these 3 replacement books. So I invite all of you to go there and check out my efforts on that front. At this time the majority of my work has been focused under the Chaos Renegades book so that have the majority of info at this time.

Monday, April 21, 2014

Chaos revisited

So I've been thinking about starting a Chaos Space Marines army lately so I've been cruising a lot of blogs and sights that talk about the Chaos Space Marine codex. Surprise surprise (Well okay not really a surprise) there's a lot of talk about how bad the codex is. You get that with pretty much any codex out there and Codex Chaos Marines is no exception. For the most part I ignore it and read what, if anything, else the article has to say. Found some interesting lists and thoughts. Then I went to check my blog roll and I was checking out a post by Virtual Stranger over on the Grim Cheapness where he was talking about embarking on a new project to build a paper hammer knight titan and then to make it Chaosy... you know because Chaos gets crap extras. He had a link to a blog run by a friend of his that explained the point of Chaos getting crap. Out of mild curiosity I followed it and checked it out. It's the standard "This is why Chaos Space marines" suck start but he did something most other people I've seen haven't done: Made reasonable suggestions as to what to do in order to address the issues raised and then explained his reasoning for those points. And there wasn't anything terribly radical about his suggestions and they didn't revolve around "World Eaters should have this" or "I can't make an Emperor's Children army because of that" either which was a real surprise. Anyway, check it out. I won't re-post what he's already gone over.

What I will do is talk about what I did with the information he posted. I took his suggestions, grabbed a digital copy of the Chaos Codex, grabbed some additional art work, loaded them into Photoshop and went to work to craft a revamped army list using the information that Marcus the Blackheart posted. So I present to you the army list for revamped Codex: Chaos Space Marines! Right click and select "Save as" to download.

the revamped Codex: Chaos Space Marines.
Basically the pages in this file would replace the HQ, Elites and Troops section from the normal Chaos Space Marines codex.

The only thing from Marcus' suggestions that I changed was I created a new unit, Chaos Legionaries. Basically, these are Marines who have been around since the heresy but don't fall into the category of being Cult marines, or Chosen. They're still more or less what they were when they were part of their respective legion.

I haven't had the chance to start play testing the changes yet, but I'm gonna try once I get the Chaos Models to put on the table. In the mean time, if any of you want to give it a whirl and post your thoughts on the changes here, I whole-heartedly encourage you to do so. Rest assured I will read the comments and take them into consideration when and if I make any edits to the file.

Friday, April 11, 2014

The Perfect Space Wolf insult

This is an idea I originally came up a couple years ago for a counts as Thousand Sons unit. The idea is pretty straight forward: Enemy marines that have been captured have been handed over to the Dark Mechanicum and converted into combat servitors. Then in agreement with their Chaos Marine allies, they lead units of these lobotomized marines into combat. The AP 3 bolters is explained by saying they are using Vengence rounds in the bolters while the 5+ invulnerable is explainable by saying they use some sort of force field when in combat.

I sold the original servitor-wolves a while back when I sold my last Chaos army. But I'm starting another one and the whole servitorized captured space wolves that count as thousand sons.... god I just love that irony, I'm putting models of the space wolves on the table that count as thousand sons all it really needs is for them to be lead by a Dark Angels Librarian (hmmm....).... anyway. Sorry ADHD kicking in there. I really love this idea so I'm revisiting it. Last time I got hung up on the counts as aspiring sorcerer model. Well I think I've got it hammered out:

this counts as Thousand Sons Aspiring Sorceror is meant to depict an Adept of the Dark Mechanicum cult.
The Adept of the Dark Mechanicum counts at an aspiring Sorcerer.
this counts as Thousand Sons Aspiring Sorceror is meant to depict an Adept of the Dark Mechanicum cult.



The mecha-axe is way bigger then I originally thought it would be, but after building the model and looking at it I've found I like it more like this. Gives this look of an over-burdened menial level worker. Like he pissed off his magos so he got assigned to lead the combat servitors into battle in agreement with whatever Chaos lord we're serving this week.

"But master, I am no warrior. I have no weapons." he pleads.

"Error! Condition: No weapons. Rectified." The Dark Magos tones in his digital logic influenced speak as he shoves the Atomic Glave at the menial.

"But... my lord... I can not wield such a weapon." The menial whines.

"Statement: Unable to wield weapon. Condition: True. Subject: Verehnass Omicron Psi 91168. Conclusion: Learn. Communication status: Terminated!" The Dark Magos replies coldly.

Anyway, the model itself is based on the Cairn Wraith model, though it's been rather extensively modified. The only parts from the model I actually used were the cloak and skull face. Everything else was added. I stuck a big wad of Green stuff into the empty cavity to give me a body to work with. Then I took a pair of mechanical legs from Anvil Industries Bionic Legs set and cut the legs from the groin and use wire to mount the legs into the green stuff. I had to cut and chop down the length of the cloak on the model to allow it to accommodate the fact that it's not going to be floating any more. Once the legs where mounted I went to work on the mecha-dendrites. I used a set of Servo Skulls from Forge World  and added the small tools to the end of the tubing I got from Dragon Forge Design. Bending the tubing proved to be a new exercise for me. I used a series of pen bodies, and tool handles of various sizes to provide a form to bend the cables around that way it would 'coil' as opposed to bend. For the left hand... er.... thing, I decided to go with something a bit different and took a small section of medium sized tubing, drilled out a hole in the center of the tubing and glued in a set of three segments of small wire. My intent was to make it look like the adepts hand disassembled and this data connection/micro manipulator/whatever extended out of his wrist. Not sure I succeeded or not.

The weapon was a whole different ball game. I got the axe it self from Max Mini's Steam Punk weapons line, cut down the length of the shaft to better accommodate the size of the model and went to work on the head (jesus that sounds like a lead in for a bad porno). The Emitter Matrix is made from a cut down section of a Necron sniper rifle and then attached to the back of the axe head.

Wow, I just listed off parts that I got from 5 separate companies. I gotta say that kinda surprises me. Anyway, I'm gonna try and base it later today.

Sunday, June 16, 2013

Branching out

So I've decided to branch out a little bit and start looking at my Chaos force. The one that's been sitting on my shelf basically ever since I got the Dark Vengence box set. Rather sad really that it's sat there this long. But I'm looking at it again. We'll see where it goes.

One unit I want to add is a unit of Thousand Sons, but I don't like the standard GW models for them. And honestly I have intentions of fielding something all together... a bit more insulting. I've built this particular idea once before so I'm looking at returning to it.

lobotimized space wolves being used as Thousand Sons marines.
These are the original version I built a couple years ago.
Yes, those are space Wolf models. Here's my idea: Captured marines are turned over the Dark Mechanicum where they are lobotomized and rebuilt into heavy company servitors with the extensive use of Bionics. Stick a dark Techno Magos of some form with the unit as the Sorcorer and I think I'll be able to use them as count-as Thousand Sons.

I've been looking at different options for bionics, mainly from third party companies. I think Anvil industries has the answer I'm looking for in their armory.  By combining their various bionic pieces with a Space Wolf kit, add some battle damage, and paint 'em up in Space Wolf colors... I think I'll need to watch my back around Wolf players. If the twisted irony of Space Wolves being controlled wasn't bad enough, I think the irony of using Space Wolf models in a counts as Thousand Sons unit will require some measure of vengence be taken.

Tuesday, June 11, 2013

Update on the Helbrute

So I haven't had the chance to give a proper update on this particular project. My model builder Attention deficit disorder as been kicking in a lot lately as you can see so I've been jumping from project to project almost with out pause for the last week. But the Helbrute is shaping up as you can see.
Chaos Helbrute converted to have 2 power fists
Chaos HelBrute with 2 Power fists
 I've begun attaching hoses, made from Green Stuff using Green Stuff Industries Tentacle Maker, to the crown around the face that had previously sported horns. It's my hope that by adding these hoses to the crown it will make it look like materials and psycho-tropics are being pumped into the body of the warrior at the heart of the Helbrute driving him on in his rage.
A close up of the converted HelBrute's face showing the cables coming off the crown
A close up of the HelBrute's face showing the cables coming off the crown
 I still have a moderate amount of work to do on the monster, not the least of which is making the three remaining tubes and fleshing them out into the body. That way the tubes will look like a part of the body and not just something that was stuck on.
I had to resulpt the muscles on the arms of the helbrute
A close up of the Musculature of the left arm.
 When I removed the arms I had to resulpt the muscles connecting to the shoulders.
I had to resulpt the muscles on the arms of the helbrute
The musculature of the right arm.
I Will need to make a new should pad for the right arm.

Tuesday, May 07, 2013

Helbrute update

Okay, so I'm a dumb ass. I did all that work on the helbrute, building the LED circuit, installing the LEDs in the fists, boring out a comparment in a base for the battery, all the work to build up the base... and I totally neglected the fact that the circuit was going to need about 8 volts of power and the dime battery only supplies 3 volts... So... end result: The 4 LED circuit I had been intending to build has been cut back to a single LED in the left power fist.

I'm also going to modify the post of the model to have the left power fist drawn back and the right one cutting across the chest like the Brute's about to swing back against an attacker with it's burning left.
 
the LED circuit in the HelBrute
But here you can see the finished base and the circuit. I used green stuff to seal off the switch and the junctions in the body. This helps do a couple things.
First it cements the switch in place so that there is no wiggle room.
Second it holds the connects in place so there's no chance of them coming loose later on.

the base of the HelBrute showing the battery
I've spent a lot of time and effort on the base of this model so I'd like to talk about it. Here you can see the dime battery and holder in the base of it. In order to accommodate the battery I attached a large resin rock formation to the base and then went in with a dremel to bore out a depression. This was a very time consumming process particularly because I had to make sure I was doing it in a sealed room, with a good vacuum to catch the shavings and resin dust. In short, I took over my fathers workshop, stuffed a towel under the door jam, hooked up a vacuum that has a hermetic seal on it and put the hose right next to where I was going to be working and then set up a fan behind me to blow the dust into the vacuum hose. Just to be safer I used gloves, a respirator, a mask sealed with petroleum jelly, and head phones. I felt a little like I was wearing a space suit or something.

the base of the HelBrute showing the built up rock face with green stuff.

In order to mount the HelBrute on the base I had to build up the rock face with some flater ares for it to stand on. So I used some of the rock facings I've made with extra green stuff over the last few months and attacked them to the resin rock with super glue. Then I went in with plumbers putty and filled in any spaces between  the resin rock and the green stuff rock facings. Once the putty dried I went in with green stuff and put down a layer. I then took several rocks and textured the green stuff with them. Over all I like how it turned out.

showing the switch on the side of the Helbrute
 Here you can see the switch under the arm to turn on the fist.
The light in the fist of the Helbrute

And here you can see the light in the fist.


Saturday, November 10, 2012

Cultist conversions

So I've been more then a little busy and haven't had the time to commit to some of my hobby projects that I would have liked to. For the most part I've been able to squeeze out a few hours a week recently. This has lead to slow progress on most of my projects and short and simple other projects. This is an example of the later.

I've gotten my hands on nearly 100 cultist models from the Dark Vengeance starter set. So now I've got 400 points worth of cannon fodder/tar pitting/pain in the butt units to throw at my enemies. Yaah for me. I have 400 points where every 5th guy is identical... boo. So I've been working on converting the models. Not extensively, but enough to break up the uniformity of the models. These conversions consist largely of minor head and hand swaps but I think they meet the bill. Some point in the not-too distant future I hope to go back and fill in some gaps with green stuff.
Converted Chaos Cultist with a spiked mace and autopistol

Chaos Cultist, converted with a simple head swap

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

converted Chaos Cultist

Thursday, September 20, 2012

Hell Brute conversion part 2

So got some work done on the converted hell brute.
I had to go a bit different with mounting the body. I actually have a length of brass rod running from under the base up through the arm into the shoulder. And then the shoulder is pinned to the body. The Torso is largely free standing in this regard. But because I cut apart the abs of the brute and have repositioned it, I have to rebuild the detail for the body.
To help in this regard I put a length of piping in the body and am using that as a base to build up the abs and back detail. I've got a couple lengths of smaller tubing I'm going to use for the hydraulics in the body.












And just because I had the original Hell brute on my desk. we get to the Brothers:

Wednesday, September 19, 2012

Hell Brute conversion

I'm going to taking a little brake from the thunderhawk, for a couple reasons. Firstly because I simply don't have the time to commit to it for the next few days. Secondly because I have to wait for several shipments to come in before I do much more. Next step is exploring the electronics part of that particular project. First thing is going to be wiring up a Shadow Sword. I've got the model kit, just waiting for the electronic parts to show up.

In the mean time I'm beginning to rebuild my Chaos Forces, and with the Chaotic contents of 2 Dark Vengeance sets, a squad of Chaos Terminators and a box of Chaos Marines I'd say I'm well on my way. I have to say as far as snap fit models go thes models from the Dark Vengeance set are excellent! I quickly traded the Dark Angels for more chaos models. So now I have 12 Chosen, 40 Cultists, 2 lords, and 2 Hell brutes. The Cultists I don't have any particular plans for converting. The Chosen I'm looking at for conversion possibilities and likewise for the lord. The HellBrute however... I've already got plans for him and have begun on it.
Got it all cut up, and ready to be rebuilt.
I've going to re-possition the entire model so that the Brute is smashing it's fist into the ground and rather then being armed with a Multi-melta it'll be armed with a Twin Linked lascannon. So you can see I've busted the major components of the model up good and proper and already set to work on the arm. To further differentiate this from the run of the mill Hellbrute I'm also going to changing a lot of smaller details. Rebuilding the arm with different details, changing the head. Removing the chest tendrils and replacing them with deterioration marks.

So, I've got the fingers on the fist cut and repositioned.











I mentioned I was going to replace the head with another one. I was originally going to use a screaming zombie head, but I couldn't find one in my bitz box. Which of course means it'll turn up right after I finish the model.