Showing posts with label Biker Marines. Show all posts
Showing posts with label Biker Marines. Show all posts

Monday, May 27, 2013

Projects and updates

So I found myself the recipient of what is probably the single best time off arrangement I can: 2 days off, 1 day of work followed by 2 more days off. Why is this such a good arrangement? Simple. I get 2 days to myself, to work on my stuff, and then just as I'm getting a little bored of my own projects.... boom I have a day of work that acts as a re-set on my own personal projects and then I have 2 more days to work on my stuff. So what have I been working on? Well several things.

Yeah I stuck a bunch of wires in a bread board.

Dragon Forge's Heroic Urban Rubble base with wires in it to power an LED
No I've done more then just that.  I'm working on a new captain on bike for my Blood Ravens but I'm feeling ambitious so I'm going to wire it up so the head lamp in the bike will light up. Which means it needs power. So using the Heroic Urban rubble bike base, available from Dragon Forge Studios, I took a dremal to the bottom of it to carve out a space for a button battery.
a Dragon Forg Base with a space drilled out to accomidate a button battery
I messed up the messurements and didn't make the opening deep enough to account for the battery clip and the battery itself. So I added a 2mm thick sheet of styreen to the bottom of the base to account for it. All in all I think it helps because I'll draw more attention to the captain who should look more heroic and stand out. 
Space marine Dark Angel bike ferring with the head lamp drilled out to accomidate a 3mm LED
I drilled out the head plate for the ferring and was going to mount the LED in it but then discovered the white LEDs I have are 5mm and 10m, not the 3mm side I need for the mounting. So I'll have to pick up some 3mm LEDs to continue working on this.
space marine bike body with the holes to accomidate the electronics
Since the bike is going to be attached to the base, and have wires running through it, I specifically went in and glued the wheel halves to the body and then carved out too spaces in the back. one you can see at the front of the rear tire. This is for the wires to come back through the body and connect to the switch in the back of the body. The second space you can just barely see at the top of the rear wheel. That's going to be where the switch will be installed.
Blood Raven Land speeders partially painted and assembled.
 Something else I've been working on: My Blood Raven's land speeder detachment! Here you can see the 3 of them:
Blood Raven Land speeder equipped with an assault canon
 I installed magnets in the noses and in the turret bases of the weapons so they can be swapped in an out.
Blood Raven Land speeder equipped with a heavy flammer
 Allowing me to field them with heavy flamers or assault cannons. I need to build the under slung heavy bolters and magnetize those as well.
pressure pot
Oh and here's some good news: My pressure pot is set up and working! So now I can start working with pressure casting and hopefully begin producing better pieces for my projects. Or I will be once I get the resin and silicons that will work with pressure casting.

Friday, March 01, 2013

Have I got my work cut out for me

So, I've had a rather bizarre series of luck the last couple weeks where I won a bunch of Ebay Bucks and used them to buy a couple kits and then I won a raffle that netted me another kit and then I got a discount at the hobby store that netted me basically a free land speeder, honestly I've lost track of it. But I took all the kits I have sitting in my cabinet waiting to be worked on and stacked them up and was rather shocked at my haul of waiting to be built kits:
Let me count out what this is getting my Blood Ravens forces:
3 Land Speeders
1 Attack Bike
6 Biker Marines
1 Land Speeder Storm
2 Drop Pods
5 Assault marines.

With the whether beginning to change toward the warmer temperatures I'll be somewhat short on time to get all of these kits built and ready for priming before the "Too-Hot" to prime weather hits. I still have those three attack bikes I built a few weeks ago ready for priming too.

Monday, February 11, 2013

More speed!

So I've been working on a new attack bike squad for my Blood Ravens. From what I've been looking at rules wise, I think Biker armies are gonna be the default go-to army for 6th edition. Hammer of Wraith, T5 all the time, a 12" move with an extra D6 charge range, relentless. I mean let's face it bikers got a lot going for 'em now.

So here is my new and freshly converted  attack bike squad:

So I'm sure you're sitting there saying "Wait a second, you said they were converted. And that they were attack bikes. Yeah the one dude's got the scanner array backpack, but what's actually converted? And why aren't they attack bikes?"

Well, I guess I used the wrong word. I think I would have been better off saying they are transformable as opposed to converted. Allow me to show you what I mean. Here is the same bike squad with different bitz:

You can see the two forward most bikers are now armed with a melta gun and plasma gun.  Here is another change:
I magnatized them so I can swap the configurations between Biker and attack bike. With the addition of magnets in the right shoulder, the models are able to swap arms so they can be armed with different weapons. By putting magnets in select locations in the under carraige of the bike and matching points on the side car I can attach and detach the side car as needed.


Sunday, February 03, 2013

We are the Blood Ravens!

A good while back I was playing Dawn of War II and I had become inspired to begin work on a Blood Ravens army. Well they had sat on the back burner for far too long and with my funds effectively stopped, following my recent medical bills, they came out of the case and got some paint on some of them. Here are two of the bikers that I got painted the other day.

First up we have the Captain on a bike:
Blood Ravens Captain on a bike with a relic blade
Blood Ravens Captain on a bike with a relic blade

Model wise he's a fairly straight forward conversion. Grey Knight helmet and great sword in right hand. The sword hand was attached to a converted rifle holding arm that I cut below the shoulder and repositioned it to be held outward. A couple other little bits add to the seniority of the model like the Raven Guard faring on the front of the model. The base is one point I would like to reference though. It comes from Dragon Forge Studios and I highly HIGHLY recommend their bases. I swear by them.

Next we have the sergent for the squad:
Blood Ravens biker Sergent with Power sword
Blood Ravens biker Sergent with Power sword
I installed a magnet in the sergeants' left shoulder to allow him to use different weapons. This is going to be compatible with my other magnetized models in the army, allowing them to swap weapons as I see fit.
Blood Ravens Biker sergent equipped with a bionic arm and chainsword.
Equipped with a bionic arm and chainsword.
Blood Ravens Biker Sergent equipped with a chainsword
Equipped with a chainsword  
Blood Ravens Biker Sergent armed with one power fist
Armed with one power fist
Blood Raven biker sergent armed with a power fist
armed with an alternate power fist